Laser Cutter Settings: Difference between revisions
Jump to navigation
Jump to search
(Creating Settings Page) |
No edit summary |
||
| Line 28: | Line 28: | ||
| 100 | | 100 | ||
| 100 | | 100 | ||
|- | |||
| 3mm Laser Ply | |||
| 100 | |||
| 14 | |||
|- | |||
| 150gsm Card | |||
| 60 | |||
| 40 | |||
|} | |} | ||
Revision as of 16:14, 2 January 2016
Laser cutter settings
Below are recommended settings for some known materials. If you want to cut something other than these, please experiment on scrap/spare material and update the table
| Material | Power | Speed
(cut) |
|---|---|---|
| 3mm Acrylic Cut | 100 | 13 |
| 3mm Acrylic Engrave (dither) | 90 | 100 |
| 3mm Acrylic Engrave (solid) | 55 | 100 |
| 3mm Acrylic Mark Shallow | 65 | 100 |
| 3mm Acrylic Mark Deep | 100 | 100 |
| 3mm Laser Ply | 100 | 14 |
| 150gsm Card | 60 | 40 |