View source for BigBox

{{Equipment
| title = BigBox
| description = E3D BigBox Dual Extruder 3D Printer
| image = BigBox.jpg
| status = Mostly working
| owner = Leeds Hackspace
| induction = Yes 
| inductionlink = Induction
| manufacturer = E3D
| model = Dual (Non Titan)
| firmware = Marlin 1.1.9
| rfid = No
| materials = Anything 1.75mm that melts below 275C
| head = Dual E3D v6 with PT100
| area = 300x200x300mm
}}

The hackspace has an E3D BigBox, which is currently mostly functional

==Usage==

The machine has two extruders. Both of which have been shown to work independently, but have yet to work together '''WELL'''.

Slicer configs are a work in progress.

==Maintainance==

TODO

==Latest Calibration Data==

This was obtained by running an M503 on the printer (which dumps the EEPROM config to serial). It is entirely valid GCode thanks to comments, and allows for restoration of calibration if EEPROM is wiped/marlin config is lost. [[Team 3D#Calibration Dump| More info]]<syntaxhighlight>
;M503
G21 ; Units in mm (mm)
M149 C ; Units in Celsius
;Filament settings: Disabled
M200 D1.75
M200 T1 D1.75
M200 D0
;Steps per unit:
M92 X160.00 Y180.00 Z1600.00 E152.00
;Maximum feedrates (units/s):
M203 X300.00 Y300.00 Z5.00 E25.00
;Maximum Acceleration (units/s2):
M201 X1000.00 Y1000.00 Z100.00 E10000.00
;Acceleration (units/s2): P<print_accel> R<retract_accel> T<travel_accel>
M204 P3000.00 R3000.00 T3000.00
;Advanced: B<min_segment_time_us> S<min_feedrate> T<min_travel_feedrate> J<junc_dev>
M205 B20000.00 S0.00 T0.00 J0.01
;Home offset:
M206 X0.00 Y0.00 Z0.00
;Hotend offsets:
M218 T1 X0.00 Y0.00 Z0.000
;Unified Bed Leveling:
M420 S0 Z0.00
;Unified Bed Leveling System v1.01 inactive
;Active Mesh Slot: -1
;EEPROM can hold 32 meshes.
;Material heatup parameters:
M145 S0 H200 B70 F0
M145 S1 H230 B95 F0
;PID settings:
M301 P14.22 I0.87 D57.97
M301 P14.22 I0.87 D57.97
M304 P288.00 I54.94 D377.56
;Z-Probe Offset (mm):
M851 X0.00 Y32.00 Z-1.50
;Tool-changing:
;Z1.00
</syntaxhighlight><br />
[[Category:3D_Printers]]