Uploads by Ad
Jump to navigation
Jump to search
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 12:48, 3 November 2014 | Spindle-speeds-belts.png (file) |  |
13 KB | Proper selection of belt/pulley combinations is essential. | 1 |
| 20:10, 3 November 2014 | Aidan.jpg (file) |  |
46 KB | 1 | |
| 13:46, 8 November 2014 | Sphere-lathe-apron.jpg (file) |  |
95 KB | Apron controls on the Sphere lathe. | 1 |
| 13:46, 8 November 2014 | Sphere-lathe-leadscrew-gearbox.jpg (file) |  |
60 KB | Sphere lathe lead screw gearbox controls | 1 |
| 16:36, 8 November 2014 | Bull-gear-locating-pin.jpg (file) |  |
58 KB | 1 | |
| 16:40, 8 November 2014 | Back-gear-lever.jpg (file) |  |
59 KB | 1 | |
| 16:06, 18 November 2014 | Lathe-workshop-page.jpg (file) |  |
182 KB | 1 | |
| 16:56, 20 June 2015 | Bandsaw-extraction.jpg (file) |  |
80 KB | 1 | |
| 22:16, 28 June 2015 | Rapidor-power-hacksaw-lubrication-1.jpg (file) |  |
239 KB | Lubrication points on the blade body runner. | 1 |
| 20:05, 4 July 2015 | Rapidor-hacksaw-with-vfd-power.jpg (file) |  |
214 KB | 1 | |
| 20:07, 4 July 2015 | Rapidor-power-controls.jpg (file) |  |
161 KB | 1 | |
| 10:38, 6 July 2015 | Power-hacksaw-cut-quality.jpg (file) |  |
125 KB | 1 | |
| 17:07, 4 August 2015 | Drill-press-side-drift-pulley-tension.jpg (file) |  |
174 KB | 1 | |
| 17:21, 4 August 2015 | Drill-press-side-drift-pulley-tension-numbers.jpg (file) |  |
176 KB | 1 | |
| 17:24, 4 August 2015 | Drill-press-drift-slot.JPG (file) |  |
138 KB | 1 | |
| 17:33, 4 August 2015 | Drill-press-drift-inserted.JPG (file) |  |
114 KB | 1 | |
| 14:07, 1 February 2016 | Openbot-mdf.jpeg (file) |  |
34 KB | 1 | |
| 15:57, 3 February 2016 | OpenBotIntent.png (file) |  |
862 KB | 1 | |
| 13:26, 16 February 2016 | OpenBot-v2.jpeg (file) |  |
97 KB | 1 | |
| 13:38, 16 February 2016 | InsideOpenBotv2.jpeg (file) |  |
139 KB | 1 | |
| 20:53, 22 February 2016 | Cnc-milling.jpg (file) |  |
165 KB | 4:3 | 2 |
| 21:36, 22 February 2016 | Drill-press-overview.jpg (file) |  |
187 KB | Reverted to version as of 17:40, 4 August 2015 | 5 |
| 17:53, 24 April 2016 | Formech-300x-pre-refit.jpg (file) |  |
167 KB | 1 | |
| 17:55, 24 April 2016 | Vacuum-former-broken-ceramic-element.jpg (file) |  |
106 KB | 1 | |
| 18:12, 24 April 2016 | Power-hacksaw-on-wheels-new-switch.jpg (file) |  |
226 KB | 1 | |
| 14:45, 6 August 2016 | Boxford-TCL-Toolpost.jpeg (file) |  |
256 KB | 1 | |
| 12:36, 1 September 2016 | Rigol-Oscilloscope.JPG (file) |  |
373 KB | 1 | |
| 12:37, 1 September 2016 | RigolDS1074Z-S-PLUS.JPG (file) |  |
373 KB | 1 | |
| 22:39, 15 January 2017 | LinuxCNC-power-on-button.png (file) |  |
20 KB | 2 | |
| 22:45, 15 January 2017 | LinuxCNC-home-buttons.png (file) |  |
22 KB | 1 | |
| 22:57, 15 January 2017 | LinuxCNC-Before-After-Homing.png (file) |  |
42 KB | 1 | |
| 23:05, 15 January 2017 | LinuxCNC-Mill-Jogging-controls.png (file) |  |
33 KB | 1 | |
| 12:47, 26 February 2017 | Cnc-router-mainpower.jpg (file) |  |
379 KB | 1 | |
| 12:52, 26 February 2017 | Cnc-router-induction-toolbits.jpg (file) |  |
323 KB | Smaller | 2 |
| 17:57, 26 February 2017 | Cnc-router-fixturing-anno.png (file) |  |
1.42 MB | 2 | |
| 09:02, 30 March 2017 | Boxford-tcl160.jpg (file) |  |
110 KB | 1 | |
| 13:13, 2 April 2017 | Temp-sensor-veroboard.jpg (file) |  |
141 KB | Temperature sensor on Veroboard | 1 |
| 18:49, 7 April 2017 | Centre-drilling.png (file) |  |
6 KB | 1 | |
| 09:43, 30 January 2018 | Dust-Extraction-Blast-Gate.jpg (file) |  |
323 KB | 1 |
