Workshop/Bench Grinder & Sander: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
m (Consumables link) |
||
| Line 1: | Line 1: | ||
{{Equipment | |||
| title = Bench Grinder & Sander | |||
| manufacturer = WorkZone (Aldi) | |||
| model = TBSG-240-2013UK | |||
| image = BenchGrinder.jpg | |||
| owner = Hackspace | |||
| rfid = No | |||
}} | |||
== The Basics == | == The Basics == | ||
| Line 5: | Line 12: | ||
* 150 mm dia x 20 mm grinding wheel (12.7 mm bore) | * 150 mm dia x 20 mm grinding wheel (12.7 mm bore) | ||
* 50 mm x 686 mm sanding belt | * 50 mm x 686 mm sanding belt | ||
== Acceptable materials == | == Acceptable materials == | ||
* | * Do not grind non-ferrous metals such as aluminium or copper on the wheel. this can lead to dangerous situations, such as the wheel exploding at high speed. Sanding aluminium using the sanding belt is fine. | ||
== Induction Requirement == | == Induction Requirement == | ||
| Line 19: | Line 26: | ||
* Long hair '''MUST''' be tied up, long sleeves should be rolled up securely. | * Long hair '''MUST''' be tied up, long sleeves should be rolled up securely. | ||
* Eye protection '''MUST''' be worn. Safety glasses are in the "Safety Equipment" box. | * Eye protection '''MUST''' be worn. Safety glasses are in the "Safety Equipment" box. | ||
* Ensure appropriate guards are in place. | * Ensure appropriate guards are in place. This includes ensuring that there is not a large gap between the edge of the tool rest and the grinding wheel. | ||
* Be careful what you shower in hot sparks (don't violate rule 0). | * Be careful what you shower in hot sparks (don't violate rule 0). | ||
== Replacement Consumables == | |||
* [http://www.screwfix.com/p/cloth-sanding-belts-unpunched-50-x-686mm-80-grit-5-pack/39583 Pack of 5x 80 grit sanding belts] | |||
[[Category:Tools_and_Equipment]] | [[Category:Tools_and_Equipment]] | ||
Revision as of 08:22, 10 September 2016
 | |
| Equipment Information | |
|---|---|
| Status | Unknown |
| Manufacturer | WorkZone (Aldi) |
| Model | TBSG-240-2013UK |
| Hackspace Information | |
| Induction Required | No |
| Card RFID Enabled | No |
| Owner | Hackspace |
The Basics
240W 2950 RPM motor driving:
- 150 mm dia x 20 mm grinding wheel (12.7 mm bore)
- 50 mm x 686 mm sanding belt
Acceptable materials
- Do not grind non-ferrous metals such as aluminium or copper on the wheel. this can lead to dangerous situations, such as the wheel exploding at high speed. Sanding aluminium using the sanding belt is fine.
Induction Requirement
No induction is required, though you are expected to have researched proper usage and suitable materials.
Safety
- Long hair MUST be tied up, long sleeves should be rolled up securely.
- Eye protection MUST be worn. Safety glasses are in the "Safety Equipment" box.
- Ensure appropriate guards are in place. This includes ensuring that there is not a large gap between the edge of the tool rest and the grinding wheel.
- Be careful what you shower in hot sparks (don't violate rule 0).