Venda: Difference between revisions

From Leeds Hackspace Wiki
Jump to navigation Jump to search
(Created page with "{{Project|name=Snack Vending Machine|status=live|}} {{cleanup|reason= the £1.20 vending machine is now inside the new space- this page will be updated|date=12:28, 26 July 201...")
 
No edit summary
Line 13: Line 13:
* Everything Works
* Everything Works
* MDB compliant controller
* MDB compliant controller
* Chiller Disabled
* Chiller Disabled (Lowest temp is 16 Degrees, space is currently 10!)
* Currently in free vend mode
* Currently in free vend mode
*[http://www.technivend.com/manuals/gpl/172%20Parts.pdf Parts Manual]
*[http://www.technivend.com/manuals/gpl/172%20Parts.pdf Parts Manual]

Revision as of 11:47, 7 December 2016

Template:Project Template:Cleanup

Venda in the space

Thanks to swwils we were able to obtain a snack vending machine for £1.20.

Quick details

  • Polyvend Model 453 (Snack Vendor)
  • 230v 50Hz 5 Amps
  • Indoor Use Only
  • 1998 Vintage
  • No Coin Mech
  • Everything Works
  • MDB compliant controller
  • Chiller Disabled (Lowest temp is 16 Degrees, space is currently 10!)
  • Currently in free vend mode
  • Parts Manual
  • Setup Guide

Protocol MDB protocol

The Multi-Drop Bus/Internal Communications Protocol is a voluntary standard for vending machine communication. This is a serial bus interface working at 9600baud in a master-slave arrangement, where the vending machine controller is the master. Each peripheral is assigned a unique address and command set.

MDB has support for the following devices:-

  • Coin Changer
  • Bill Validator
  • Cashless devices
  • Communications Gateway
  • Universal Satellite Device
  • Coin Hopper or Tube Dispenser

In order to operate the serial line as a bus with multiple devices attached MDB uses a 9bit serial over the traditional 8bit, 9n1 vs 8n1 The master polls each device for activity, all communication sessions are initiated by the master addressing a slave, slaves are only allowed to respond when addressed, this prevents bus collisions.

The master indicates an address byte/start of session by setting the 9th bit, the correct slave responds as needed and on sending it's last byte it also sets the 9th bit to indicated end of it's session (although the master will ACK this)

Vending machine dimensions

183 cm H 81.3 cm W 72.4 cm D 249 kg (550 lbs)