Workshop: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 2: | Line 2: | ||
We have an HPC Laser LS-3020 laser cutter. Further details can be found [[Workshop/Laser_Cutter|here]]. | We have an HPC Laser LS-3020 laser cutter. Further details can be found [[Workshop/Laser_Cutter|here]]. | ||
== Lathe == | |||
Our lathe is an Axminster 460. It's fitted with a 100mm(4") chuck, and a 13mm(1/2") chuck in the tailstock (it's on an MT2 taper, so other centers can be fitted). We're currently on the lookout for any suitable lathe tooling for it. | |||
== Bench Drill == | == Bench Drill == | ||
| Line 10: | Line 13: | ||
* Speeds: 450/730/1330/2170/3000 rpm | * Speeds: 450/730/1330/2170/3000 rpm | ||
== | == Air Compressor == | ||
We've got a 24l 8 bar air compressor with the following tools: | |||
* Air gun | |||
* | * Spray gun | ||
* | * Degreasing gun | ||
* Tyre inflator | |||
== Tools we'd like == | == Tools we'd like == | ||
* Scroll saw | * Scroll saw | ||
* Router (and table) | * Router (and table) | ||
* Table saw | * Table saw | ||
Revision as of 16:21, 20 November 2012
Laser Cutter
We have an HPC Laser LS-3020 laser cutter. Further details can be found here.
Lathe
Our lathe is an Axminster 460. It's fitted with a 100mm(4") chuck, and a 13mm(1/2") chuck in the tailstock (it's on an MT2 taper, so other centers can be fitted). We're currently on the lookout for any suitable lathe tooling for it.
Bench Drill
Our bench drill is a Boxford PD5. Should it ever go missing the required chuck key size is S10/K3 (the last one was £3.02 from Dixon Hall).
- Chuck capacity: 13mm
- Speeds: 450/730/1330/2170/3000 rpm
Air Compressor
We've got a 24l 8 bar air compressor with the following tools:
- Air gun
- Spray gun
- Degreasing gun
- Tyre inflator
Tools we'd like
- Scroll saw
- Router (and table)
- Table saw