CNC Lathe/Inserts: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
mNo edit summary |
||
| Line 28: | Line 28: | ||
Feed: 0.08 - 0.50 | Feed: 0.08 - 0.50 | ||
DOC: 1.0 - 5.0 | DOC: 1.0 - 5.0 | ||
Tested & works: 300/0.1/0.5 | |||
| | | | ||
| | | | ||
Revision as of 23:01, 28 February 2017
All cutting speeds are defined in Surface Metres per Minute.
| Cutting Speed, Feed per Revolution, Depth of Cut | ||||||||
|---|---|---|---|---|---|---|---|---|
| Use | Manufacturer | Insert Code | Steel | Stainless Steel | Cast Iron | Al/Cu Alloys | High-Temp Alloys | Hard Materials |
| Turning (General) | Uni-Tip/APT | DCGT 11T302 ALU AK10 | Speed: 60 - 150
Feed: 0.08 - 0.20 DOC: 1.0 - 3.0 |
Speed: 300-700
Feed: 0.08 - 0.50 DOC: 1.0 - 5.0 Tested & works: 300/0.1/0.5 |
||||
| Turning (General) | Uni-Tip/APT | CCGT 060204 ALU AK10 | Speed: 60 - 150
Feed: 0.08 - 0.20 DOC: 1.0 - 3.0 |
Speed: 300-700
Feed: 0.08 - 0.50 DOC: 1.0 - 5.0 |
||||
| Cutting Speed | ||||||||
|---|---|---|---|---|---|---|---|---|
| Use | Manufacturer | Insert Code | Steel | Stainless Steel | Cast Iron | Al/Cu Alloys | High-Temp Alloys | Hard Materials |
| Threading (Ext) | APT | 16ER-0.5 ISO | 90-190 | 80-120 | 80-150 | 200-300 | 25-55 | 20-30 |
| Threading (Ext) | APT | 16ER-1.0 ISO | 90-190 | 80-120 | 80-150 | 200-300 | 25-55 | 20-30 |
| Threading (Ext) | APT | 16ER-1.25 ISO | 90-190 | 80-120 | 80-150 | 200-300 | 25-55 | 20-30 |
| Threading (Ext) | APT | 16ER-1.50 ISO | 90-190 | 80-120 | 80-150 | 200-300 | 25-55 | 20-30 |