Venda
We no longer have this vending machine.
Quick details
- Polyvend Model 453 (Snack Vendor)
- 230v 50Hz 5 Amps
- Indoor Use Only
- 1998 Vintage
- No Coin Mech
- Everything Works
- MDB compliant controller
- Chiller Disabled (Lowest temp is 16 Degrees, space is currently 10!)
- Currently in free vend mode
- Parts Manual
- Setup Guide
MDB Protocol
The Multi-Drop Bus/Internal Communications Protocol is a voluntary standard for vending machine communication. This is a serial bus interface working at 9600baud in a master-slave arrangement, where the vending machine controller is the master. Each peripheral is assigned a unique address and command set.
MDB has support for the following devices:-
- Coin Changer
- Bill Validator
- Cashless devices
- Communications Gateway
- Universal Satellite Device
- Coin Hopper or Tube Dispenser
In order to operate the serial line as a bus with multiple devices attached MDB uses a 9bit serial over the traditional 8bit, 9n1 vs 8n1 The master polls each device for activity, all communication sessions are initiated by the master addressing a slave, slaves are only allowed to respond when addressed, this prevents bus collisions.
The master indicates an address byte/start of session by setting the 9th bit, the correct slave responds as needed and on sending it's last byte it also sets the 9th bit to indicated end of it's session (although the master will ACK this)
Vending machine dimensions
183 cm H 81.3 cm W 72.4 cm D 249 kg (550 lbs)