3D printers: Difference between revisions

From Leeds Hackspace Wiki
Jump to navigation Jump to search
mNo edit summary
mNo edit summary
Line 4: Line 4:
* [[MendelMax|MendelMax]] in need of a firmware flash and then testes
* [[MendelMax|MendelMax]] in need of a firmware flash and then testes
* [[Wallace|Wallace]] in need of a new thermister and TLC
* [[Wallace|Wallace]] in need of a new thermister and TLC
* [[mUVe 3D|mUVe 3D]] Testing (this is a Privately owned printer.  
* [[mUVe 3D|mUVe 3D]] Testing  
(this is a Privately owned printer).  
If you wish to make use of it please request permission from Owner.
If you wish to make use of it please request permission from Owner.
* [[Enclosed Printer|Enclosed Printer]] this is an enclosed printer primarily designed to print ABS.  
* [[Enclosed Printer|Enclosed Printer]] this is an enclosed printer primarily designed to print ABS.
(this is a Privately owned printer)
If you wish to make use of it please request permission from Andy Cook (OnlyHalfDone) or Joe (Jopeg).
If you wish to make use of it please request permission from Andy Cook (OnlyHalfDone) or Joe (Jopeg).



Revision as of 19:06, 15 September 2017

List of 3D Printers and Status :-

(this is a Privately owned printer). If you wish to make use of it please request permission from Owner.

(this is a Privately owned printer) If you wish to make use of it please request permission from Andy Cook (OnlyHalfDone) or Joe (Jopeg).


[Blue Prints] and info for reprap printers.

Firmware for all flash-able devices is located hear