Ant Weight Design Tips: Difference between revisions
Jump to navigation
Jump to search
(Add page on ant weight design tips, with component weights) |
(No difference)
|
Revision as of 15:24, 2 December 2022
Design Constraints
The primary design constraints for an and weight robot are that it must fit within a 100mm cube and weigh 150g or less.
Component weights
| Description | Weight |
|---|---|
| 44mm wheels | 29g/pair |
| 34mm wheels | 8g/pair |
| N20 motors | 20g/pair |
| FS2A receiver | 3g |
| FS-IA6 receiver | 7g |
| BBB 2 channel ant weight motor controller | 11g |
| Malenki Nano | 3g |
| 1S 380mAh LiPo Battery | 10g |
If you're 3d printing your robot components then Prusa Slicer will tell you the weight of your model printed in your chosen material, but for a rough idea the sample bots I've produced have come out around 75g when printed in PETG with 5 walls (to make them extra robust).