Detailed Instructions On Use: Difference between revisions

From Leeds Hackspace Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 5: Line 5:


== Overview of the vinyl cutter ==
== Overview of the vinyl cutter ==
[[File:Vinyl Cutter Main Unit.jpeg|300px|thumb|left|]]
[[File:Vinyl Cutter Main Unit.jpeg|600px]]
To the left is an overview of the vinyl cutter, it lives in the craft area with it's grey cloth dust cover over it, it connects via USB to a computer running the relevant cutting software and is mains powered.
 
Above is an overview of the vinyl cutter, it lives in the craft area with it's grey cloth dust cover over it, it connects via USB to a computer running the relevant cutting software and is mains powered.


The main parts of the cutter are:
The main parts of the cutter are:
Line 12: Line 13:
File:Vinyl cutter control.jpeg|Control panel and display, used to set things up on the machine
File:Vinyl cutter control.jpeg|Control panel and display, used to set things up on the machine
File:Vinyl cutter Z axis.jpeg|Knife / pen holder, holds the cutter and moves it along the Y axis, an electromagnet pulls the holder down onto the work
File:Vinyl cutter Z axis.jpeg|Knife / pen holder, holds the cutter and moves it along the Y axis, an electromagnet pulls the holder down onto the work
File:Vinyl cutter blade.jpeg|The blade, it's tiny and is adjusted to stick out just enough to cut only the vinyl and not right through to the backing paper, it is adjustable, but please don't adjust it without knowing you can re-set it
File:Vinyl cutter pinch rollers.jpeg|Metal rollers, and movable pinch rollers to grip the vinyl and move it along the X axis
File:Vinyl cutter pinch rollers.jpeg|Metal rollers, and movable pinch rollers to grip the vinyl and move it along the X axis
File:Vinyl cutter pinch rollers rear.jpeg|The pinch rollers from the rear of the machine, the levers are to release them to load vinyl
File:Vinyl cutter pinch rollers rear.jpeg|The pinch rollers from the rear of the machine, the levers are to release them to load vinyl

Revision as of 20:23, 8 July 2019

This page will show in detail how to use the vinyl cutter, from connecting it to a computer, checking the settings, loading vinyl, performing cuts, then weeding and making the finished layered vinyl graphics.



Overview of the vinyl cutter

Vinyl Cutter Main Unit.jpeg

Above is an overview of the vinyl cutter, it lives in the craft area with it's grey cloth dust cover over it, it connects via USB to a computer running the relevant cutting software and is mains powered.

The main parts of the cutter are:




DELETE AFTER FINISH