Detailed Instructions On Use: Difference between revisions

From Leeds Hackspace Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 11: Line 11:
<gallery>
<gallery>
File:Vinyl cutter control.jpeg|Control panel and display
File:Vinyl cutter control.jpeg|Control panel and display
File:Vinyl cutter Z axis.jpeg|Knife / pen Z axis (electromagnet that pulls the knife holder down onto the work)]
File:Vinyl cutter Z axis.jpeg|Knife / pen holder, an electromagnet that pulls the holder down onto the work]
</gallery>
</gallery>



Revision as of 19:54, 8 July 2019

This page will show in detail how to use the vinyl cutter, from connecting it to a computer, checking the settings, loading vinyl, performing cuts, then weeding and making the finished layered vinyl graphics.



Overview of the vinyl cutter

Vinyl Cutter Main Unit.jpeg

Here you can see the vinyl cutter, it lives in the craft area with it's cloth dust cover over it, the stand is on wheels, but just watch as you move it, the wheels don't move that well sometimes, and the cutter is not physically fixed to the stand (it's rubber feet sit on holes in the metalwork on the top of the stand, so you could dislodge it by rough handeling.

The main parts of the cutter are:




DELETE AFTER FINISH