Difference between revisions of "Dust Extraction"

From Leeds Hackspace Wiki
Jump to: navigation, search
(New page)
 
m (Add blast gate image)
 
Line 2: Line 2:
  
 
Currently it has inlets for the table saw, wood lathe, disc sander and a floor sweep.
 
Currently it has inlets for the table saw, wood lathe, disc sander and a floor sweep.
 +
 +
[[File:Dust-Extraction-Blast-Gate.jpg|500px|thumb|right|Close the blast gate when it's not in use. Slide the metal panel into the fitting to close. Lock with the screw in either open or closed position.]]

Latest revision as of 10:49, 30 January 2018

There is dust extraction built into the woodworking corner of the workshop. It consists of 100 mm galvanised piping connected to T-junctions and blast gates.

Currently it has inlets for the table saw, wood lathe, disc sander and a floor sweep.

Close the blast gate when it's not in use. Slide the metal panel into the fitting to close. Lock with the screw in either open or closed position.