Electronics/HM203-7

From Leeds Hackspace Wiki
Revision as of 12:29, 30 August 2016 by MichaelW (talk | contribs)
Jump to navigation Jump to search
Oscilloscope
HamegHM203-7.JPG
Analogue oscilloscope
Equipment Information
Status Unknown
Manufacturer Hameg
Model HM203-7
Hackspace Information
Induction Required Yes
Induction Information Here
Card RFID Enabled No
Owner Hackspace & Members & Fligg
[More Info]


The Basics

An oscilloscope is a piece of electrical test equipment which allows you to visually see an electrical signal shown on a display. We have two Hameg HM203-7 oscilloscopes at the hackspace.

Specification

A basic oscilloscope specification is given below:

  • Analogue Cathode ray tube (CRT)
  • Bandwidth: 20MHz
  • 2 channel + Ext trigger (2.5:1 to 12.5v/div)
  • 5v to 5mv vertical (x5 giving 1mv sensitivity)
  • 100ms to 0.2us horizontal (x10 to give 20ns/div)
  • Component tester
Pattern created using X-Y mode using 2 signal generator inputs
  • X-Y mode for Lissajous figure and drawing funny images with audio!
  • Scope 1 issues: [31 March 2016] Functional. CH1 10% low on vertical, CH2 10% low on vertical, Horizontal about 5% high, confirmed against cal point and a precision v ref.
  • Scope 2 Issues: [31 March 2016] Functional. CH1 10% low on vertical, CH2 10% low on vertical, Horizontal about 5% low, confirmed against cal point and a precision v ref.
  • Manual TBD
  • Owner: Fligg, labelled scope 1
  • Owner: TBD, labelled scope 2


Calibration

The spaces oscilloscopes will NOT normally have a calibration certificate. Most will be well outside their calibration date. Having said that it is common to perform a basic oscilloscopes calibration check before each use against a known calibration source to confirm it is suitable for use. Most oscilloscopes have a calibration signal output point on the front panel. Some have rear panel outputs.

Induction

Ask on the mailing list for volunteers to demonstrate the use of any of the test equipment.

Safety

You must read the safety documentation in this link before using this equipment.

Useful References