Electronics/MegaPA310

From Leeds Hackspace Wiki
Revision as of 16:01, 18 December 2017 by MichaelW (talk | contribs) (Created page with "Category:Tools_and_Equipment Category:Electronics {{Equipment | title = Mega PA310 PCB processing | description = PCB processing tank (etch tank) | manufacturer = Mega...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


Mega PA310 PCB processing
File:MegaPA310.JPG
PCB processing tank (etch tank)
Equipment Information
Status Unknown
Manufacturer Mega
Model PA310
Hackspace Information
Induction Required Yes
Induction Information Here
Card RFID Enabled No
Owner LHS



The Basics

MEGA PA310 Tri-Tank Unit for Printed Circuit Board (PCB) processing. A self-contained triple process unit with built-in DEVELOP / SPRAY WASH / BUBBLE ETCHING functions.

Specification

  • MEGA PA310 Tri-Tank Unit
  • Moulded 13amp plug (kettle lead)
  • Two syphons
  • Front panel tank control
  • Connections provided at the rear for drain and cold water requirements.
  • Width 400mm, Depth 525mm, Height 380mm.

Safety

You must read the safety documentation in this link before using this equipment.

Safety is very important when using this equipment, you must also read the safety information below. This is the basic information, you are expected to do further research into the area yourselves before using the equipment.

  • You must read and be familiar with the safety datasheets for all chemicals you use, eg developer / etchant.
      • MORE TBD ***

Induction

Ask on the mailing list for volunteers to demonstrate the use of the equipment.

Use

Producing a PCB https://www.megauk.com/producing_a_pcb.php

WARNING: Using the WRONG ARTWORK FILM in a laser printer can cause it to melt and stick inside the printer damaging the printer - an expensive mistake!

We also have a UV exposure unit for exposing photoresist type PCB.


Useful References

  • Youtube has many tutorials on UV exposure of PCBs