Electronics/RigolDS1074Z-S-PLUS

From Leeds Hackspace Wiki
Revision as of 16:41, 19 June 2016 by MichaelW (talk | contribs)
Jump to navigation Jump to search
Oscilloscope
RigolDS1074Z-S-PLUS.JPG
Digital oscilloscope
Equipment Information
Status Unknown
Manufacturer Rigol
Model DS1074Z-S PLUS
Hackspace Information
Induction Required Yes
Induction Information Here
Card RFID Enabled No
Owner Hackspace & Members


The Basics

An oscilloscope is a piece of electrical test equipment which allows you to visually see an electrical signal shown on a display.

The Rigol DS1074Z-S PLUS is a high quality four channel 70MHz bandwidth digital storage oscilloscope with built in 25MHz bandwidth 2 channel arbitrary waveform generator and the option for external logic analyzer probe. The logic analyzer probe is purchased seperately - or made!

Safety

You must read the safety documentation in this link before using this equipment.

Specification

  • Rigol DS1074Z-S PLUS
  • Digital storage oscilloscope
  • 4 channel analog input
  • Bandwidth: 70MHz, (hackable)
  • 1GS/s real time sample rate
  • 12Mpts memory depth
  • FFT frequency display mode
  • 2 channel 25MHz waveform generator
  • PLUS model allows optional upgrade (extra cost) to make it a MSO1000Z-S by purchase of the external digital logic probes (RPL1116, 16 channel + 16 ground)
  • 7 inch WVGA multiple intensity levels waveform display
  • Ultravision technology
  • Optional analysis and decode packages
  • Hacks: TBD
  • Issues: TBD
  • Manual: TBD

Calibration

For last calibration date, check the side of the unit.

It is common to perform a basic oscilloscopes calibration check before each use against a known calibration source to confirm it is suitable for use. Most oscilloscopes have a calibration signal output point on the front panel. Some have rear panel outputs.

Induction

Ask on the mailing list for volunteers to demonstrate the use of any of the test equipment.

Useful References