Laser Cutter Settings

From Leeds Hackspace Wiki
Revision as of 19:49, 26 April 2015 by Joran (talk | contribs) (Creating Settings Page)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Laser cutter settings

Below are recommended settings for some known materials. If you want to cut something other than these, please experiment on scrap/spare material and update the table

Material Power Speed

(cut)

3mm Acrylic Cut 100 13
3mm Acrylic Engrave (dither) 90 100
3mm Acrylic Engrave (solid) 55 100
3mm Acrylic Mark Shallow 65 100
3mm Acrylic Mark Deep 100 100