Lathe: Difference between revisions
Jump to navigation
Jump to search
(Created page with "== The Basics == We've got an APTC 460 lathe. Vital statistics are as follows: *1.5hp motor *250/650/900/1700 RPM *100mm chuck *460mm between centers *MT2 tailstock (currently …") |
|||
| Line 1: | Line 1: | ||
[[File:Lathe.jpg|300px|thumb|right]] | |||
== The Basics == | == The Basics == | ||
Revision as of 18:07, 20 November 2012
The Basics
We've got an APTC 460 lathe. Vital statistics are as follows:
- 1.5hp motor
- 250/650/900/1700 RPM
- 100mm chuck
- 460mm between centers
- MT2 tailstock (currently fitted with a 13mm drill chuck)
Our lathe is suitable for turning metals and plastics. Aluminium, brass, copper, delrin/acetal and nylon shouldn't present any problems. It should be possible to machine mild steel too, though you may find some additional cooling is necessary.