Difference between revisions of "Lulzbot Mini"

From Leeds Hackspace Wiki
Jump to: navigation, search
m
(Fixed formatting)
Line 14: Line 14:
 
| firmware = [https://www.lulzbot.com/content/downloads Lulzbot official firmware]
 
| firmware = [https://www.lulzbot.com/content/downloads Lulzbot official firmware]
 
| head = 0.5mm Normal Lulzbot Head
 
| head = 0.5mm Normal Lulzbot Head
| more_link = https://www.lulzbot.com/store/printers/lulzbot-mini Lulzbot
+
| more_link = http://download.lulzbot.com/Mini/1.04/
 
| area = 150x150x150mm
 
| area = 150x150x150mm
 
| materials = 3mm hackspace filament
 
| materials = 3mm hackspace filament
 
}}
 
}}
  
A Lulzbot Mini V1 helpfully provided by Lulzbot and the hackpace foundation.
+
A Lulzbot Mini V1 helpfully provided by Lulzbot and the hackpace foundation. It takes 3mm filament, and currently only runs filament from the hackspace; talk to [[Team 3D]] to ask about additional filament.
  
Thanks to the Hackspace Foundation and Lulzbot, we have acquired a Lulzbot Mini (https://www.lulzbot.com/store/printers/lulzbot-mini) which is a 3mm filament based 3D Printer.
+
== Usage ==
  
The LulzBot Mini is well documented (https://www.lulzbot.com/support) with software support for Linux, Windows and Mac with their version of Cura (https://www.lulzbot.com/cura) this software is also used to upgrade the firmware on the LulzBot.
+
It is recommended that you read the [https://www.lulzbot.com/cura-lulzbot-edition-quick-start-guide Lulzbot Quickstart Guide] before using the printer.
  
The LulzBot Mini 1 firmware is based on Marlin (http://download.lulzbot.com/Software/Marlin/1.1.9.28/Marlin_Mini_SingleExtruder_1.1.9.28_193d1f804.hex / https://www.lulzbot.com/content/downloads)
+
This printer uses [[Team 3D/Materials/Cura|Cura]]. Lulzbot creates a specific build of cura for their printers, installed on the relevent machines, and avaliable [https://www.lulzbot.com/cura here] for all relevent OSs (Win, Linux, Mac). This includes the printer and filament configs.
  
If you want to begin using the LulzBot Mini then you should start by following the Quick Start Guide so you're at least familiar with how it is setup.
+
The printer is well documented by Lulzbot, avaliable on their website.
  
https://www.lulzbot.com/cura-lulzbot-edition-quick-start-guide
+
=== Induction ===
http://download.lulzbot.com/Mini/1.04/documentation/Quick_Start_Guide/Mini_1.04_Quick_Start_Guide_FINAL.pdf
 
  
There is also a user manual:
+
This section will be completed by [[Users:Stanto|Stanto]]
http://download.lulzbot.com/Mini/1.04/documentation/Manual/interior_9780989378468.pdf
 
  
And a 'cheat sheet' poster:
+
== External Links ==
http://download.lulzbot.com/Mini/1.0/documentation/Mini_Poster_11x17.pdf
 
  
Latest versions of documentation and similar can be found here, including replacement 3D printable parts:
+
* [https://www.lulzbot.com/support Lulzbot Support]
http://download.lulzbot.com/Mini/1.04/
+
* [https://www.lulzbot.com/cura-lulzbot-edition-quick-start-guide Quickstart Guide]
 
+
* [http://download.lulzbot.com/Mini/1.04/documentation/Quick_Start_Guide/Mini_1.04_Quick_Start_Guide_FINAL.pdf Quickstart PDF]
(Any content in Mini/2 and above is for a different version of the LulzBot Mini 3D Printer)
+
* [http://download.lulzbot.com/Mini/1.04/documentation/Manual/interior_9780989378468.pdf User Manual]
 
+
* [http://download.lulzbot.com/Mini/1.0/documentation/Mini_Poster_11x17.pdf Cheat Sheet]
Please be aware of the following safety considerations for the LulzBot Mini:
+
* [http://download.lulzbot.com/Mini/1.04/documentation/safety_warnings/safety_warnings_LulzBot_Mini.pdf Safety Considerations]
http://download.lulzbot.com/Mini/1.04/documentation/safety_warnings/safety_warnings_LulzBot_Mini.pdf
 

Revision as of 21:32, 29 August 2019


Lulzbot Mini
Leeds hackspace logo.png
A Small Lulzbot
Equipment Information
Status Not yet present
Manufacturer Lulzbot
Model Version 1
Firmware Lulzbot official firmware
Head 0.5mm Normal Lulzbot Head
Materials 3mm hackspace filament
Usable Area 150x150x150mm
Hackspace Information
Induction Required Yes
Induction Information Here
Card RFID Enabled No
Owner Leeds Hackspace
[More Info]


A Lulzbot Mini V1 helpfully provided by Lulzbot and the hackpace foundation. It takes 3mm filament, and currently only runs filament from the hackspace; talk to Team 3D to ask about additional filament.

Usage

It is recommended that you read the Lulzbot Quickstart Guide before using the printer.

This printer uses Cura. Lulzbot creates a specific build of cura for their printers, installed on the relevent machines, and avaliable here for all relevent OSs (Win, Linux, Mac). This includes the printer and filament configs.

The printer is well documented by Lulzbot, avaliable on their website.

Induction

This section will be completed by Stanto

External Links