Lulzbot Mini: Difference between revisions

From Leeds Hackspace Wiki
Jump to navigation Jump to search
(Fixed formatting)
m (Fixed formatting)
Line 1: Line 1:
[[Category:3D_Printers]]
{{Equipment
{{Equipment
| title = Lulzbot Mini
| title = Lulzbot Mini
Line 18: Line 16:
| materials = 3mm hackspace filament
| materials = 3mm hackspace filament
}}
}}
A Lulzbot Mini V1 helpfully provided by Lulzbot and the hackpace foundation. It takes 3mm filament, and currently only runs filament from the hackspace; talk to [[Team 3D]] to ask about additional filament.
A Lulzbot Mini V1 helpfully provided by Lulzbot and the hackpace foundation. It takes 3mm filament, and currently only runs filament from the hackspace; talk to [[Team 3D]] to ask about additional filament.


Line 31: Line 28:
=== Induction ===
=== Induction ===


This section will be completed by [[Users:Stanto|Stanto]]
This section will be completed by [[User:Stanto|Stanto]]


== External Links ==
== External Links ==
Line 41: Line 38:
* [http://download.lulzbot.com/Mini/1.0/documentation/Mini_Poster_11x17.pdf Cheat Sheet]
* [http://download.lulzbot.com/Mini/1.0/documentation/Mini_Poster_11x17.pdf Cheat Sheet]
* [http://download.lulzbot.com/Mini/1.04/documentation/safety_warnings/safety_warnings_LulzBot_Mini.pdf Safety Considerations]
* [http://download.lulzbot.com/Mini/1.04/documentation/safety_warnings/safety_warnings_LulzBot_Mini.pdf Safety Considerations]
[[Category:3D_Printers]]

Revision as of 21:06, 29 August 2019

Lulzbot Mini
Leeds hackspace logo.png
A Small Lulzbot
Equipment Information
Status Not yet present
Manufacturer Lulzbot
Model Version 1
Firmware Lulzbot official firmware
Head 0.5mm Normal Lulzbot Head
Materials 3mm hackspace filament
Usable Area 150x150x150mm
Hackspace Information
Induction Required Yes
Induction Information Here
Card RFID Enabled No
Owner Leeds Hackspace
[More Info]


A Lulzbot Mini V1 helpfully provided by Lulzbot and the hackpace foundation. It takes 3mm filament, and currently only runs filament from the hackspace; talk to Team 3D to ask about additional filament.

Usage

It is recommended that you read the Lulzbot Quickstart Guide before using the printer.

This printer uses Cura. Lulzbot creates a specific build of cura for their printers, installed on the relevent machines, and avaliable here for all relevent OSs (Win, Linux, Mac). This includes the printer and filament configs.

The printer is well documented by Lulzbot, avaliable on their website.

Induction

This section will be completed by Stanto

External Links