Lulzbot Mini: Difference between revisions

From Leeds Hackspace Wiki
Jump to navigation Jump to search
(Added infobox)
mNo edit summary
Line 12: Line 12:
| inductionlink = #Inductions
| inductionlink = #Inductions
| rfid = No
| rfid = No
| firmware = [https://www.prusa3d.com/drivers/ Prusa official firmware]
| firmware = [https://www.lulzbot.com/content/downloads Lulzbot official firmware]
| more_link = https://help.prusa3d.com/l/en
| head = 0.5mm Normal Lulzbot Head
| more_link = https://www.lulzbot.com/store/printers/lulzbot-mini Lulzbot
| area = 150x150x150mm
| area = 150x150x150mm
| materials = 1.75mm filament
| materials = 3mm hackspace filament
}}
}}


A Lulzbot Mini V1 helpfully provided by Lulzbot and the hackpace foundation.


Thanks to the Hackspace Foundation and Lulzbot, we have acquired a Lulzbot Mini (https://www.lulzbot.com/store/printers/lulzbot-mini) which is a 3mm filament based 3D Printer.
Thanks to the Hackspace Foundation and Lulzbot, we have acquired a Lulzbot Mini (https://www.lulzbot.com/store/printers/lulzbot-mini) which is a 3mm filament based 3D Printer.

Revision as of 20:31, 27 August 2019


Lulzbot Mini
Leeds hackspace logo.png
A Small Lulzbot
Equipment Information
Status Not yet present
Manufacturer Lulzbot
Model Version 1
Firmware Lulzbot official firmware
Head 0.5mm Normal Lulzbot Head
Materials 3mm hackspace filament
Usable Area 150x150x150mm
Hackspace Information
Induction Required Yes
Induction Information Here
Card RFID Enabled No
Owner Leeds Hackspace
[Lulzbot More Info]


A Lulzbot Mini V1 helpfully provided by Lulzbot and the hackpace foundation.

Thanks to the Hackspace Foundation and Lulzbot, we have acquired a Lulzbot Mini (https://www.lulzbot.com/store/printers/lulzbot-mini) which is a 3mm filament based 3D Printer.

The LulzBot Mini is well documented (https://www.lulzbot.com/support) with software support for Linux, Windows and Mac with their version of Cura (https://www.lulzbot.com/cura) this software is also used to upgrade the firmware on the LulzBot.

The LulzBot Mini 1 firmware is based on Marlin (http://download.lulzbot.com/Software/Marlin/1.1.9.28/Marlin_Mini_SingleExtruder_1.1.9.28_193d1f804.hex / https://www.lulzbot.com/content/downloads)

If you want to begin using the LulzBot Mini then you should start by following the Quick Start Guide so you're at least familiar with how it is setup.

https://www.lulzbot.com/cura-lulzbot-edition-quick-start-guide http://download.lulzbot.com/Mini/1.04/documentation/Quick_Start_Guide/Mini_1.04_Quick_Start_Guide_FINAL.pdf

There is also a user manual: http://download.lulzbot.com/Mini/1.04/documentation/Manual/interior_9780989378468.pdf

And a 'cheat sheet' poster: http://download.lulzbot.com/Mini/1.0/documentation/Mini_Poster_11x17.pdf

Latest versions of documentation and similar can be found here, including replacement 3D printable parts: http://download.lulzbot.com/Mini/1.04/

(Any content in Mini/2 and above is for a different version of the LulzBot Mini 3D Printer)

Please be aware of the following safety considerations for the LulzBot Mini: http://download.lulzbot.com/Mini/1.04/documentation/safety_warnings/safety_warnings_LulzBot_Mini.pdf