Difference between revisions of "Team Laser"

From Leeds Hackspace Wiki
Jump to: navigation, search
(Created page)
 
(Upgrades)
 
Line 3: Line 3:
 
If something goes wrong with the laser, we probably already know about it
 
If something goes wrong with the laser, we probably already know about it
  
== Common laser issues ==
+
==Common laser issues==
  
 
There are many common issues with the laser; some of them are being worked on
 
There are many common issues with the laser; some of them are being worked on
  
* Weak cutting in [spot] - This is due to mirror alignment, which will be re done whenever someone cabible is avaliable
+
*Weak cutting in [spot] - This is due to mirror alignment, which will be re done whenever someone cabible is avaliable
* Controller crashin - Known feature, is being worked on (see upgrades section)
+
*Controller crashin - Known feature, is being worked on (see upgrades section)
* Card reader not responding - Turn off ALL the switches (on the wall and on the laser), wait ~5 mins, then turn everything back on
+
*Card reader not responding - Turn off ALL the switches (on the wall and on the laser), wait ~5 mins, then turn everything back on
  
== Upgrades ==
+
==Upgrades==
  
 +
The laser cutter is eversoslightly problemattic; and upgrades are in progress to fix numerous issues
 +
 +
=== Mirror upgrade ===
 +
[[User:Gazz|Gazz]] has been working on upgrading the laser cutter mirrors using a kit; currently only one of the mirrors is installed; but is fully aligned
 +
 +
=== Controller upgrade ===
 
TODO
 
TODO

Latest revision as of 22:30, 1 October 2019

Team laser works on the laser; as the laser always works perfectly, we do absolutely nothing (they say while lying through their teeth)

If something goes wrong with the laser, we probably already know about it

Common laser issues

There are many common issues with the laser; some of them are being worked on

  • Weak cutting in [spot] - This is due to mirror alignment, which will be re done whenever someone cabible is avaliable
  • Controller crashin - Known feature, is being worked on (see upgrades section)
  • Card reader not responding - Turn off ALL the switches (on the wall and on the laser), wait ~5 mins, then turn everything back on

Upgrades

The laser cutter is eversoslightly problemattic; and upgrades are in progress to fix numerous issues

Mirror upgrade

Gazz has been working on upgrading the laser cutter mirrors using a kit; currently only one of the mirrors is installed; but is fully aligned

Controller upgrade

TODO