VFD

From Leeds Hackspace Wiki
Jump to navigation Jump to search

VFD

The space currently has 2 Variable Frequency Drives; these magic boxes provide 3 phase AC power to 3 phase motors from the single phase mains of the space.

Machines that use a VFD

  • The power saw has a HYOD
  • The CNC Mill has a newer HYOD.

VFD Control

The power saw VFD doesn't really need settings changing for normal operation.

The CNC Mill controller interfaces with the CNC Mill VFD through PWM (0-10v) to adjust things like spindle speed, and direction.

VFD Parameters

Most VFD have a set of around 500 PD values that allow you to change settings on the unit (such as drive frequency); changes to these PD values can fry motors and/or the VFD. These PD values should only need to be set once, tailored to the application for the VFD and never would normally need to be changed by anyone but a service engineer.