Vinyl Cutter: Difference between revisions

From Leeds Hackspace Wiki
Jump to navigation Jump to search
m (→‎Induction: inductors)
m (add category)
Line 1: Line 1:
[[Category:Tools_and_Equipment]]
{{WarningBoxOrange|This page needs details adding. If you know something about the vinyl cutter, please add it to this page!}}
{{WarningBoxOrange|This page needs details adding. If you know something about the vinyl cutter, please add it to this page!}}
{{Equipment
{{Equipment

Revision as of 11:22, 19 June 2017

Warning icon This page needs details adding. If you know something about the vinyl cutter, please add it to this page!


Vinyl Cutter
VinylCutter.jpg
Cuts vinyl and plots things.
Equipment Information
Status Unknown
Manufacturer China!
Model Unknown
Hackspace Information
Induction Required Yes
Induction Information Here
Card RFID Enabled No
Owner Hackspace


The Basics

The vinyl cutter uses a very small, sharp knife to cut through only one layer of a self-adhesive vinyl/protective backing sandwich. It can be used to create artwork for use on the heat press, as stencils for spray painting and etch masks for electro-etching, amongst other things.

It is also possible to swap out the knife for a plotting pen so that it can be used to draw patterns for sewing.

Induction

Please see Joe (japoteg) or Aidan (adnbr) if you want a Vinyl Cutter induction. Come armed with an SVG vector file that you would like to cut!