Workshop: Difference between revisions

Revision as of 17:35, 20 November 2012

We have an HPC Laser LS-3020 laser cutter. Further details can be found here.

Our lathe is an Axminster 460. Further details can be found here.

We're currently on the lookout for any suitable lathe tooling for it.

Our bench drill is a Boxford PD5. Should it ever go missing the required chuck key size is S10/K3 (the last one was £3.02 from Dixon Hall).

We've got a 24l 8 bar air compressor with the following tools:

@@ Line 4: / Line 4: @@
 == [[Workshop/Lathe|Lathe]] ==
-Our lathe is an Axminster 460. It's fitted with a 100mm(4") chuck, and a 13mm(1/2") chuck in the tailstock (it's on an MT2 taper, so other centers can be fitted). We're currently on the lookout for any suitable lathe tooling for it.
+Our lathe is an Axminster 460. Further details can be found [[Workshop/Lathe|here]].
+We're currently on the lookout for any suitable lathe tooling for it.
 == Bench Drill ==