Workshop/Bench Grinder & Sander: Difference between revisions
Jump to navigation
Jump to search
m (Belt length correction) |
(Safety) |
||
| Line 7: | Line 7: | ||
* 50 mm x 686 mm sanding belt | * 50 mm x 686 mm sanding belt | ||
== | == Safety == | ||
* Ensure | * Long hair '''MUST''' be tied up, long sleeves should be rolled up securely. | ||
* Eye protection '''MUST''' be worn. Safety glasses are in the "Safety Equipment" box. | |||
* Ensure appropriate guards are in place. | |||
* Be careful what you shower in hot sparks (don't violate rule 0). | * Be careful what you shower in hot sparks (don't violate rule 0). | ||
* Do not grind non-ferrous metals such as aluminium or copper on the wheel. The sanding belt is OK. | |||
Revision as of 19:13, 19 January 2016
The Basics
240W 2950 RPM motor driving:
- 150 mm dia x 20 mm grinding wheel (12.7 mm bore)
- 50 mm x 686 mm sanding belt
Safety
- Long hair MUST be tied up, long sleeves should be rolled up securely.
- Eye protection MUST be worn. Safety glasses are in the "Safety Equipment" box.
- Ensure appropriate guards are in place.
- Be careful what you shower in hot sparks (don't violate rule 0).
- Do not grind non-ferrous metals such as aluminium or copper on the wheel. The sanding belt is OK.