Lulzbot Mini: Difference between revisions
(Added infobox) |
mNo edit summary |
||
| Line 12: | Line 12: | ||
| inductionlink = #Inductions | | inductionlink = #Inductions | ||
| rfid = No | | rfid = No | ||
| firmware = [https://www. | | firmware = [https://www.lulzbot.com/content/downloads Lulzbot official firmware] | ||
| more_link = https:// | | head = 0.5mm Normal Lulzbot Head | ||
| more_link = https://www.lulzbot.com/store/printers/lulzbot-mini Lulzbot | |||
| area = 150x150x150mm | | area = 150x150x150mm | ||
| materials = | | materials = 3mm hackspace filament | ||
}} | }} | ||
A Lulzbot Mini V1 helpfully provided by Lulzbot and the hackpace foundation. | |||
Thanks to the Hackspace Foundation and Lulzbot, we have acquired a Lulzbot Mini (https://www.lulzbot.com/store/printers/lulzbot-mini) which is a 3mm filament based 3D Printer. | Thanks to the Hackspace Foundation and Lulzbot, we have acquired a Lulzbot Mini (https://www.lulzbot.com/store/printers/lulzbot-mini) which is a 3mm filament based 3D Printer. | ||
Revision as of 20:31, 27 August 2019
 | |
| A Small Lulzbot | |
| Equipment Information | |
|---|---|
| Status | Not yet present |
| Manufacturer | Lulzbot |
| Model | Version 1 |
| Firmware | Lulzbot official firmware |
| Head | 0.5mm Normal Lulzbot Head |
| Materials | 3mm hackspace filament |
| Usable Area | 150x150x150mm |
| Hackspace Information | |
| Induction Required | Yes |
| Induction Information | Here |
| Card RFID Enabled | No |
| Owner | Leeds Hackspace |
| [Lulzbot More Info] | |
A Lulzbot Mini V1 helpfully provided by Lulzbot and the hackpace foundation.
Thanks to the Hackspace Foundation and Lulzbot, we have acquired a Lulzbot Mini (https://www.lulzbot.com/store/printers/lulzbot-mini) which is a 3mm filament based 3D Printer.
The LulzBot Mini is well documented (https://www.lulzbot.com/support) with software support for Linux, Windows and Mac with their version of Cura (https://www.lulzbot.com/cura) this software is also used to upgrade the firmware on the LulzBot.
The LulzBot Mini 1 firmware is based on Marlin (http://download.lulzbot.com/Software/Marlin/1.1.9.28/Marlin_Mini_SingleExtruder_1.1.9.28_193d1f804.hex / https://www.lulzbot.com/content/downloads)
If you want to begin using the LulzBot Mini then you should start by following the Quick Start Guide so you're at least familiar with how it is setup.
https://www.lulzbot.com/cura-lulzbot-edition-quick-start-guide http://download.lulzbot.com/Mini/1.04/documentation/Quick_Start_Guide/Mini_1.04_Quick_Start_Guide_FINAL.pdf
There is also a user manual: http://download.lulzbot.com/Mini/1.04/documentation/Manual/interior_9780989378468.pdf
And a 'cheat sheet' poster: http://download.lulzbot.com/Mini/1.0/documentation/Mini_Poster_11x17.pdf
Latest versions of documentation and similar can be found here, including replacement 3D printable parts: http://download.lulzbot.com/Mini/1.04/
(Any content in Mini/2 and above is for a different version of the LulzBot Mini 3D Printer)
Please be aware of the following safety considerations for the LulzBot Mini: http://download.lulzbot.com/Mini/1.04/documentation/safety_warnings/safety_warnings_LulzBot_Mini.pdf