Electronics/RigolDS1074Z-S-PLUS: Difference between revisions

From Leeds Hackspace Wiki
Jump to navigation Jump to search
mNo edit summary
mNo edit summary
Line 22: Line 22:
== Specification ==
== Specification ==


[[File:RigolDS1074Z-S-PLUS LAConnector.JPG|300px|thumb|right|Logic Analyzer connector]]
* Rigol DS1074Z-S PLUS
* Rigol DS1074Z-S PLUS
* Digital storage oscilloscope
* Digital storage oscilloscope
Line 34: Line 35:
* Ultravision technology
* Ultravision technology
* Optional analysis and decode packages
* Optional analysis and decode packages
* Hacks: TBD
* Hacks: Hackable options. not hacked yet.
* Issues: TBD
* Issues: TBD
* Manual: TBD
* Manual: TBD
Line 43: Line 44:
   
   
It is common to perform a basic oscilloscopes calibration check before each use against a known calibration source to confirm it is suitable for use. Most oscilloscopes have a calibration signal output point on the front panel. Some have rear panel outputs.  
It is common to perform a basic oscilloscopes calibration check before each use against a known calibration source to confirm it is suitable for use. Most oscilloscopes have a calibration signal output point on the front panel. Some have rear panel outputs.  
== Hacks ==
[[File:RigolDS1074Z-S-PLUS LAConnector.JPG|300px|thumb|right|Logic Analyzer connector]]
There is a plan to make a logic analyzer probe. See mailing list for details. The connector appears to be a SCSI HD68 pin type.


== Induction ==
== Induction ==

Revision as of 11:36, 28 September 2016

Oscilloscope
RigolDS1074Z-S-PLUS.JPG
Digital oscilloscope
Equipment Information
Status Unknown
Manufacturer Rigol
Model DS1074Z-S PLUS
Hackspace Information
Induction Required Yes
Induction Information Here
Card RFID Enabled No
Owner Hackspace & Members


The Basics

An oscilloscope is a piece of electrical test equipment which allows you to visually see an electrical signal on a display.

The Rigol DS1074Z-S PLUS is a high quality four channel 70MHz bandwidth digital storage oscilloscope with built in 25MHz bandwidth 2 channel arbitrary waveform generator and the option for external logic analyzer probe. The logic analyzer probe is purchased seperately - or made!

Safety

You must read the safety documentation in this link before using this equipment.

Specification

Logic Analyzer connector
  • Rigol DS1074Z-S PLUS
  • Digital storage oscilloscope
  • 4 channel analog input
  • Bandwidth: 70MHz, (hackable)
  • 1GS/s real time sample rate
  • 12Mpts memory depth
  • FFT frequency display mode
  • 2 channel 25MHz waveform generator
  • PLUS model allows optional upgrade (extra cost) to make it a MSO1000Z-S by purchase of the external digital logic probes (RPL1116, 16 channel + 16 ground)
  • 7 inch WVGA multiple intensity levels waveform display
  • Ultravision technology
  • Optional analysis and decode packages
  • Hacks: Hackable options. not hacked yet.
  • Issues: TBD
  • Manual: TBD

Calibration

For last calibration date, check the side of the unit.

It is common to perform a basic oscilloscopes calibration check before each use against a known calibration source to confirm it is suitable for use. Most oscilloscopes have a calibration signal output point on the front panel. Some have rear panel outputs.

Induction

Ask on the mailing list for volunteers to demonstrate the use of any of the test equipment.

Useful References