Electronics/RigolDS1074Z-S-PLUS
 | |
| Digital oscilloscope | |
| Equipment Information | |
|---|---|
| Status | Unknown |
| Manufacturer | Rigol |
| Model | DS1074Z-S PLUS |
| Hackspace Information | |
| Induction Required | Yes |
| Induction Information | Here |
| Card RFID Enabled | No |
| Owner | Hackspace & Members |
The Basics
An oscilloscope is a piece of electrical test equipment which allows you to visually see an electrical signal on a display.
The Rigol DS1074Z-S PLUS is a high quality four channel 70MHz bandwidth digital storage oscilloscope with built in 25MHz bandwidth 2 channel arbitrary waveform generator and the option for external logic analyzer probe. The logic analyzer probe is purchased seperately - or made!
Safety
You must read the safety documentation in this link before using this equipment.
Specification
- Rigol DS1074Z-S PLUS
- Digital storage oscilloscope
- 4 channel analog input
- Bandwidth: 70MHz, (hackable)
- 1GS/s real time sample rate
- 12Mpts memory depth
- FFT frequency display mode
- 2 channel 25MHz waveform generator
- PLUS model allows optional upgrade (extra cost) to make it a MSO1000Z-S by purchase of the external digital logic probes (RPL1116, 16 channel + 16 ground)
- 7 inch WVGA multiple intensity levels waveform display
- Ultravision technology
- Optional analysis and decode packages
- Hacks: TBD
- Issues: TBD
- Manual: TBD
Calibration
For last calibration date, check the side of the unit.
It is common to perform a basic oscilloscopes calibration check before each use against a known calibration source to confirm it is suitable for use. Most oscilloscopes have a calibration signal output point on the front panel. Some have rear panel outputs.
Hacks
There is a plan to make a logic analyzer probe. See mailing list for details.
Induction
Ask on the mailing list for volunteers to demonstrate the use of any of the test equipment.