Laser Cutter Settings
Jump to navigation
Jump to search
Laser cutter settings
Below are recommended settings for some known materials. If you want to cut something other than these, please experiment on scrap/spare material and update the table
| Material | Power | Speed
(cut) |
|---|---|---|
| 3mm Acrylic Cut | 100 | 7 |
| 3mm Acrylic Engrave (dither) | 90 | 100 |
| 3mm Acrylic Engrave (solid) | 55 | 100 |
| 3mm Acrylic Mark Shallow | 50 | 50 |
| 3mm Acrylic Mark Deep* | 100 | 100 |
| 3mm Laser Ply | 100 | 7 |
| 3mm Laser Ply Mark Shallow | 50 | 50 |
| 3mm Laser Ply Mark Deep* | 100 | 100 |
| 150gsm Card | 40 | 60 |
- Mark Deep has a slight problem of not cutting any line which is within another one (i.e. it can only Mark Deep jam doughnuts, not ring doughnuts) so it is better to just adjust the settings for Mark Shallow instead.