Laser Cutter Settings

Laser cutter settings

Below are recommended settings for some known materials. If you want to cut something other than these, please experiment on scrap/spare material and update the table

Material	Power	Speed (cut)
3mm Acrylic Cut	100	7
3mm Acrylic Engrave (dither)	90	100
3mm Acrylic Engrave (solid)	55	100
3mm Acrylic Mark Shallow	50	50
3mm Acrylic Mark Deep*	100	100
3mm Laser Ply	100	7
3mm Laser Ply Mark Shallow	50	50
3mm Laser Ply Mark Deep*	100	100
150gsm Card	40	60

• Mark Deep has a slight problem of not cutting any line which is within another one (i.e. it can only Mark Deep jam doughnuts, not ring doughnuts) so it is better to just adjust the settings for Mark Shallow instead.