BigBox
 | |
| E3D BigBox Dual Extruder 3D Printer | |
| Equipment Information | |
|---|---|
| Status | Mostly working |
| Manufacturer | E3D |
| Model | Dual (Non Titan) |
| Firmware | Marlin 1.1.9 |
| Head | Dual E3D v6 with PT100 |
| Materials | Anything 1.75mm that melts below 275C |
| Usable Area | 300x200x300mm |
| Hackspace Information | |
| Induction Required | Yes |
| Induction Information | Here |
| Card RFID Enabled | No |
| Owner | Leeds Hackspace |
The hackspace has an E3D BigBox, which is currently mostly functional
Usage
The machine has two extruders. Both of which have been shown to work independently, but have yet to work together WELL.
Slicer configs are a work in progress.
Maintainance
TODO
Latest Calibration Data
This was obtained by running an M503 on the printer (which dumps the EEPROM config to serial). It is entirely valid GCode thanks to comments, and allows for restoration of calibration if EEPROM is wiped/marlin config is lost. More info
G21 ; (mm) M149 C ; Units in Celsius ;Filament settings: Disabled M200 D1.75 M200 T1 D1.75 M200 D0 ;Steps per unit: M92 X160.00 Y180.00 Z1600.00 E152.00 ;Maximum feedrates (units/s): M203 X150.00 Y150.00 Z6.00 E50.00 ;Maximum Acceleration (units/s2): M201 X1000 Y1000 Z100 E10000 ;Acceleration (units/s2): P<print_accel> R<retract_accel> T<travel_accel> M204 P1000.00 R5000.00 T1000.00 ;Advanced: B<min_segment_time_us> S<min_feedrate> T<min_travel_feedrate> X<max_x_jerk> Y<max_y_jerk> Z<max_z_jerk> E<max_e_jerk> M205 B20000 S0.00 T0.00 X8.00 Y8.00 Z0.40 E5.00 ;Home offset: M206 X0.00 Y0.00 Z0.00 ;Hotend offsets: M218 T1 X0.00 Y0.00 ;Unified Bed Leveling: M420 S1 Z10.00 ;Unified Bed Leveling System v1.01 active. ;Active Mesh Slot: 0 ;EEPROM can hold 33 meshes. ;Material heatup parameters: M145 S0 H200 B60 F0 M145 S1 H240 B120 F0 ;PID settings: M301 P20.29 I1.59 D64.84 M304 P336.00 I61.00 D462.40 ;Z-Probe Offset (mm): M851 Z-1.75
Status
2018-07
Stanto has a spare RAMPS that is being modified to fit the box. Flig has ordered a 24V supply to make it function. Aim is to get it functional soon(TM).
OLD
The BigBox is currently out of action and is been updated to a ramps controller. Watch this space. ScottK 22/12/17
{Currently only one of the Extruders is functional; both hotends are fine.}