Vinyl Cutter
This page needs details adding. If you know something about the vinyl cutter, please add it to this page!
 | |
| Cuts vinyl and plots things. | |
| Equipment Information | |
|---|---|
| Status | Unknown |
| Manufacturer | China! |
| Model | Unknown |
| Hackspace Information | |
| Induction Required | Yes |
| Induction Information | Here |
| Card RFID Enabled | No |
| Owner | Hackspace |
The Basics
The vinyl cutter uses a very small, sharp knife to cut through only one layer of a self-adhesive vinyl/protective backing sandwich. It can be used to create artwork for use on the heat press, as stencils for spray painting and etch masks for electro-etching, amongst other things.
It is also possible to swap out the knife for a plotting pen so that it can be used to draw patterns for sewing.
The hackspace keeps a stock of sticker adhesive / sign vinyl which will last well outside in the elements. We also keep a stock of vinyl for making sticking designs onto t-shirts or other textiles, the heat press is useful for this.
Resolution X (dpi) 995
Resolution Y (dpi) 997
Induction
Please see Joe (japoteg) or Aidan (adnbr) if you want a Vinyl Cutter induction. Come armed with an SVG vector file that you would like to cut!