Laser Cutter Settings: Difference between revisions
Jump to navigation
Jump to search
(Creating Settings Page) |
(No difference)
|
Revision as of 20:49, 26 April 2015
Laser cutter settings
Below are recommended settings for some known materials. If you want to cut something other than these, please experiment on scrap/spare material and update the table
| Material | Power | Speed
(cut) |
|---|---|---|
| 3mm Acrylic Cut | 100 | 13 |
| 3mm Acrylic Engrave (dither) | 90 | 100 |
| 3mm Acrylic Engrave (solid) | 55 | 100 |
| 3mm Acrylic Mark Shallow | 65 | 100 |
| 3mm Acrylic Mark Deep | 100 | 100 |