Lulzbot Mini
 | |
| A Small Lulzbot | |
| Equipment Information | |
|---|---|
| Status | Not yet present |
| Manufacturer | Lulzbot |
| Model | Version 1 |
| Firmware | Lulzbot official firmware |
| Head | 0.5mm Normal Lulzbot Head |
| Materials | 3mm hackspace filament |
| Usable Area | 150x150x150mm |
| Hackspace Information | |
| Induction Required | Yes |
| Induction Information | Here |
| Card RFID Enabled | No |
| Owner | Leeds Hackspace |
| [More Info] | |
A Lulzbot Mini V1 helpfully provided by Lulzbot and the hackspace foundation. It takes 3mm filament, and currently only runs filament from the hackspace; talk to Team 3D to ask about additional filament.
Introduction
To familiarise yourself with the Lulzbot mini in 14 minutes before an induction please watch this YouTube video review by 3D Printing Nerd: https://www.youtube.com/watch?v=MPjCrcqLCAo
Usage
It is recommended that you read the Lulzbot Quickstart Guide before using the printer.
This printer uses Cura. Lulzbot creates a specific build of cura for their printers, installed on the relevent machines, and avaliable here for all relevent OSs (Win, Linux, Mac). This includes the printer and filament configs.
The printer is well documented by Lulzbot, avaliable on their website.
Induction
This section will be completed by Stanto