Workshop: Difference between revisions

Latest revision as of 11:25, 6 March 2025

Large Format Equipment List
v t e Lathe	v t e CNC Mill	v t e Wood Lathe
v t e Table Saw	v t e metal brake	v t e Band Saw
v t e Bench Drill	v t e Bench Grinder & Sander	v t e Power Hacksaw
v t e Router	v t e Air Compressor	v t e MGF (Silent) Air Compressor
v t e Forging Tools	v t e Planer_Thicknesser	v t e Large Bandsaw
v t e Belt Sander	v t e Kerry Metal Lathe	v t e Dust Extractor

Tools we'd like

Tools we're getting

Mug Press (Will be on loan from CuppaMatt come June)
Sublimation Printer (Will be on loan from CuppaMatt come June)

Suggestions?

Small unexciting tools we have

powered

Soldering Irons
Hand drills
battery grinder

unpowered

screwdrivers
spanners
tin snips (l,r,s)

Car maintenance

Whilst we don't have a four post car lift yet(!!) some basic car maintenance tools are available for those who would like to perform their own maintenance on their vehicle. Please note this can only be done in the car park and it is best to do it when Enterprise are closed because the car park is very busy during the day presenting lots of hazards with jacked-up cars etc.

4,400 lb (2000kg) jack for jacking up a car or other large object
axle stands for car maintenance - ALWAYS USE THESE WHEN USING THE JACK IF UNDER THE VEHICLE!
spanners and other tools

Consumables

Nuts & bolts

@@ Line 1: / Line 1: @@
-== [[Workshop/Laser_Cutter|Laser Cutter]] ==
+[[File:Workshop_Pano.jpg|1200px]]
+{| class="mw-collapsible mw-collapsed wikitable"
+! colspan="3" |Large Format Equipment List
+|-
+|{{Box-round|title=[[Lathe|Lathe]]
+|[[File:Lathe-workshop-page.jpg|300x300px|link=Lathe]]}}
+|{{Box-round|title=[[CNC Mill]]|[[File:Cnc-milling.jpg|300x300px|link=CNC_Mill]]}}
+|{{Box-round|title=[[Wood_Lathe|Wood Lathe]]|[[File:WoodLathe.jpg|300x300px|link=Wood_Lathe]]}}
+|-
+|{{Box-round|title=[[Table_Saw|Table Saw]]|[[File:Rojektablesaw.jpg|300x300px|link=Table_Saw]]}}
+|{{Box-round|title=[[Sheet_Metal_Tool|metal brake]]|[[File:Sheet_Metal_Tool.jpg|300x300px|link=Sheet_Metal_Tool]]}}
+|{{Box-round|title=[[Band_Saw|Band Saw]]
+|[[File:Bandsaw.jpg|300x300px|link=Band_Saw]]}}
+|-
+|{{Box-round|title=[[Workshop/Bench_Drill|Bench Drill]]
+|[[File:drill-press-overview.jpg|300x300px|link=Workshop/Bench_Drill]]}}
+|{{Box-round|title=[[Workshop/Bench_Grinder_&_Sander|Bench Grinder & Sander]]
+|[[File:BenchGrinder.jpg|300x300px|link=Workshop/Bench_Grinder_&_Sander]]}}
+|{{Box-round|title=[[Power_Hacksaw|Power Hacksaw]]
+|[[File:Hacksaw.jpg|300x300px|link=Power_Hacksaw]]}}
+|-
+|{{Box-round|title=[[Workshop/Router|Router]]
+|[[File:Router.jpg|300x300px|link=Workshop/Router]]}}
+|{{Box-round|title=[[Air_Compressor|Air Compressor]]
+|[[File:Compressor.jpg|300x300px|link=Air_Compressor]]}}
+|{{Box-round|title=[[MGF_Air_Compressor|MGF (Silent) Air Compressor]]
+|[[File:Mgf_air_compressor.jpg|300x300px|link=MGF_Air_Compressor]]}}
+|-
+|{{Box-round|title=[[Forging Tools]]
+|[[File:Anvil.jpg|300x300px|link=Forge]]}}
+|{{Box-round|title=[[Planer_Thicknesser]]
+|[[File:TTB579PLN_planer_thicknesser.jpg|300x300px|link=Planer_Thicknesser]]}}
+|{{Box-round|title=[[Large Bandsaw]]
+|[[File:LargeBandsaw.jpg|300x300px|link=Large_Bandsaw]]}}
+|-
+|{{Box-round|title=[[Belt Sander]]
+|[[File:BeltSander.jpg|300x300px|link=Belt_Sander]]}}
+|{{Box-round|title=[[Kerry Metal Lathe]]
+|[[File:KerryMetalLathe.jpg|300x300px|link=Kerry_Metal_Lathe]]}}
+|{{Box-round|title=[[Dust Extractor]]
+|[[File:Dustextrator.jpg|300x300px|link=Planer_Thicknesser]]}}
+|}
-We have an HPC Laser LS-3020 laser cutter. Further details can be found [[Workshop/Laser_Cutter|here]].
+==Tools we'd like==
-== [[Workshop/Lathe|Lathe]] ==
+==Tools we're getting==
-Our lathe is an Axminster 460. Further details can be found [[Workshop/Lathe|here]].
+*Mug Press (Will be on loan from CuppaMatt come June)
+*Sublimation Printer (Will be on loan from CuppaMatt come June)
+Suggestions?
-We're currently on the lookout for any suitable lathe tooling for it.
+==Small unexciting tools we have==
-== Bench Drill ==
+===powered===
-Our bench drill is a [http://www.boxford.co.uk/boxford/docs/products/mandrills.htm Boxford PD5].
-Should it ever go missing the required chuck key size is S10/K3 (the last one was £3.02 from Dixon Hall).
-* Chuck capacity: 13mm
+*Soldering Irons
-* Speeds: 450/730/1330/2170/3000 rpm
+*Hand drills
+*battery grinder
-== Air Compressor ==
+===unpowered===
+*screwdrivers
+*spanners
+* tin snips (l,r,s)
-We've got a 24l 8 bar air compressor with the following tools:
+==Car maintenance==
+Whilst we don't have a four post car lift yet(!!) some basic car maintenance tools are available for those who would like to perform their own maintenance on their vehicle.  Please note this can only be done in the car park and it is best to do it when Enterprise are closed because the car park is very busy during the day presenting lots of hazards with jacked-up cars etc.
-* Air gun
+*4,400 lb (2000kg) jack for jacking up a car or other large object
-* Spray gun
+*axle stands for car maintenance - ALWAYS USE THESE WHEN USING THE JACK IF UNDER THE VEHICLE!
-* Degreasing gun
+*spanners and other tools
-* Tyre inflator
-== Tools we'd like ==
+==Consumables==
-* Scroll saw
+*[[Workshop/Consumables|Nuts & bolts]]
-* Router (and table)
-* Table saw
+[[Category:Tools_and_Equipment]]