Workshop

From Leeds Hackspace Wiki
Revision as of 14:31, 2 June 2018 by Nav (talk | contribs)
Jump to navigation Jump to search

100%

Lathe-workshop-page.jpg
Cnc-milling.jpg
NewLaser-workshop-page.jpg
Wood Lathe.jpg
Table Saw.jpg
Sheet Metal Tool.jpg
Bandsaw.jpg
Drill-press-overview.jpg
BenchGrinder.jpg
MendelMax.jpg
Hacksaw.jpg
HeatPress.jpg
Router.jpg
Compressor.jpg
Formech-300x-pre-refit.jpg
VinylCutter.jpg
Anvil.jpg

Tools we'd like

Tools we're getting

  • Mug Press (Will be on loan from CuppaMatt come June)
  • Sublimation Printer (Will be on loan from CuppaMatt come June)

Suggestions?

Small unexciting tools we have

powered

  • Soldering Irons
  • Hand drills
  • battery grinder

unpowered

  • screwdrivers
  • spanners
  • tin snips (l,r,s)

Car maintenance

Whilst we don't have a four post car lift yet(!!) some basic car maintenance tools are available for those who would like to perform their own maintenance on their vehicle. Please note this can only be done in the car park and it is best to do it when Enterprise are closed because the car park is very busy during the day presenting lots of hazards with jacked-up cars etc.

  • 4,400 lb (2000kg) jack for jacking up a car or other large object
  • axle stands for car maintenance - ALWAYS USE THESE WHEN USING THE JACK IF UNDER THE VEHICLE!
  • spanners and other tools

Consumables